ภาพประกอบ สินค้าจริงอาจแตกต่าง
เซ็นเซอร์ลำแสง (Photoelectric)Retro-Reflex Sensor, 5 m, Red laser, PNP NO/NC, M12
รุ่นP1NL410
- Sensing principle
- Retro-reflective
- Sensing range
- 1–5 m
- Output
- PNP
- Connection
- M12 connector
- Light source
- Red laser
- IO-Link
- Yes
General
- Housing
- Cuboid compact
- Sensor type
- Retro-Reflex Sensor
Optical
- Range
- 5000 mm
- Optics
- Single-Lens Optic
- Light source
- Laser, red
- Max. ambient light
- 10000 Lux
- Light spot diameter
- 1.5 mm
- Light spot geometry
- Focused
- Polarization filter
- Yes
- Reference reflector
- RE6151BM
- Switching hysteresis
- < 15 %
- Laser class (EN 60825-1)
- 1
- Smallest recognizable part
- 0.3 mm
Electrical
- Voltage drop
- < 2 V
- Response time
- 0.25 ms
- Supply voltage
- 10…30 V DC
- Protection class
- III
- Switching current
- 100 mA
- Overload protection
- Yes
- Switching frequency
- 2000 Hz
- Short-circuit protection
- Yes
- Current consumption (24 V)
- < 20 mA
- Response time (speed mode)
- 0.14 ms
- Reverse polarity protection
- Yes
- Supply voltage with IO-Link
- 18…30 V DC
- Switching frequency (speed mode)
- 3500 Hz
Output
- IO-Link
- IO-Link V1.1
- Switching output
- PNP NO/NC
- Configurable circuit
- NC, NC/NO, NO
- Configurable output type
- Push-pull, NPN, PNP
Mechanical
- Weight
- 30 g
- Connection
- M12 × 1; 4-pin
- Optic cover
- Plastic, PMMA
- Housing material
- Plastic, ABS/PC
- Degree of protection
- IP67, IP68
Setting
- Setting method
- Potentiometer
Environment
- Operating temperature
- -25…60 °C
Safety
- MTTFd (EN ISO 13849-1)
- 2733.11 a
Retro-reflex 5 m · Red laser · PNP NO/NC · M12 · IO-Link · IP67, IP68
- Retro-reflex Sensor ทำงานด้วยลำแสงเลเซอร์ขนาดเล็กร่วมกับรีเฟลกเตอร์ ลำแสงเลเซอร์แบบ Focused (Laser Class 1) สามารถตรวจจับวัตถุขนาดตั้งแต่ 0.3 mm ได้ตลอดช่วงระยะการทำงาน เช่น ในงานตรวจสอบการประกอบ การป้อนชิ้นงาน และการมีอยู่ของวัตถุ สามารถตั้งค่าเซ็นเซอร์ (PNP/NPN, NC/NO, ระยะสวิตช์) และอ่านสถานะการสวิตช์และค่าสัญญาณผ่านอินเทอร์เฟซ IO-Link ได้
- รองรับ Condition Monitoring
- ความถี่การสวิตช์สูง
- รองรับ IO-Link 1.1
- เลนส์แบบ Focused
- ตรวจจับชิ้นงานขนาดเล็กตั้งแต่ 0.3 mm
วิธีสั่งซื้อ
- 1ส่งคำขอใบเสนอราคาระบุรหัสสินค้าและจำนวนที่ต้องการ
- 2รับใบเสนอราคาทีมงานตรวจสอบและส่งใบเสนอราคาให้
- 3จัดส่ง / ติดตั้งยืนยันคำสั่งซื้อแล้วจัดส่ง หรือติดตั้งหน้างาน