Illustration — the actual product may differ
Photoelectric SensorsRetro-Reflex Sensor, 9.5 m, Red laser, NPN NO, M12
Product codeP1NL408
- Sensing principle
- Retro-reflective
- Sensing range
- > 5 m
- Output
- NPN
- Connection
- M12 connector
- Light source
- Red laser
- IO-Link
- Yes
General
- Housing
- Cuboid compact
- Sensor type
- Retro-Reflex Sensor
Optical
- Range
- 9500 mm
- Optics
- Single-Lens Optic
- Light source
- Laser, red
- Max. ambient light
- 10000 Lux
- Light spot geometry
- Collimated
- Polarization filter
- Yes
- Reference reflector
- RE6151BM
- Switching hysteresis
- < 15 %
- Laser class (EN 60825-1)
- 1
Electrical
- Voltage drop
- < 2 V
- Response time
- 0.1 ms
- Supply voltage
- 10…30 V DC
- Protection class
- III
- Switching current
- 100 mA
- Overload protection
- Yes
- Switching frequency
- 5000 Hz
- Short-circuit protection
- Yes
- Current consumption (24 V)
- < 20 mA
- Reverse polarity protection
- Yes
- Supply voltage with IO-Link
- 18…30 V DC
Output
- IO-Link
- IO-Link V1.1
- Switching output
- NPN NO
- Configurable circuit
- NC, NC/NO, NO
- Configurable output type
- Push-pull, NPN, PNP
Mechanical
- Weight
- 49 g
- Connection
- M12 × 1; 4-pin
- Optic cover
- Plastic, PMMA
- Housing material
- Plastic, ABS/PC
- Degree of protection
- IP67, IP68
Setting
- Setting method
- Potentiometer
Environment
- Operating temperature
- -25…60 °C
Safety
- MTTFd (EN ISO 13849-1)
- 2369.59 a
Retro-reflex 9.5 m · Red laser · NPN NO · M12 · IO-Link · IP67, IP68
- The retro-reflex sensor works with a fine laser beam and a reflector. The laser class 1 collimated laser beam detects objects, for instance, when checking installation, feed or presence, starting at a size of 0.75 mm over the entire range. The IO-Link interface can be used to configure retro-reflex sensors (PNP/NPN, NC/NO, switching distance) and to output switching statuses and signal values.
- Condition monitoring
- High switching frequency
- IO-Link 1.1
- Detect extremely small parts starting at 0.75 mm
How to order
- 1Send a quote requestList the product codes and quantities you need
- 2Receive the quotationOur team checks the request and sends you a quotation
- 3Delivery / installationConfirm the order, then we deliver or install on site